Our closet system can be used for many other applications as well. All parts are based on the 32mm system and can be ordered to suite almost limitless layouts.

Closet Left, Right and Partition Panels:The left, right and partition ends have line bore at 32mm increments with the line bore ending 9.5mm from the top and bottom. When ordering please refer to the vertical panel heights chart.

The panels can be ordered in any depth. Panels greater than 14" will have a 3rd line bore to locate the hanging rod correctly. Panels greater than 19" will have a third cam fitting centered on panel and fixed shelf.Hanging Brackets:Panel ends can be ordered with or without a hanging bracket which you will need to specify in the order from.

Hutches:

Hutches are available based on your specifications. Please see catalog for our standard hutch. When ordering please provide as much information as possible on the custom parts page.

Fixed & Adjustable shelves:

Fixed shelves will have a matching cam fitting that matches the end panels. Adjustable shelves will have no drilling done.  When ordering both fixed and adjustable shelves you will need to specify the exact sizes you would like the parts to be. Corner Fixed & Adjustable Shelves:Corner fixed shelves will have a back notch for a left or right hand configuration 14" wide. Cam fittings will be bored as needed for attachment to end panels. Adjustable shelves will be 1/8" smaller in length and width and will also have anoted left or right end.

Toe kicks & Cleats:

Toe-kick parts will have a cam fitting drilled at the top. Toe-kick heights must be ordered in increments of 32mm starting from our standard 63.5mm high toe-kick part. When ordering please specify the exact width you would like.

Doors & Drawer Fronts:

Door and Drawer front heights are in increments of 32mm. Please refer to the Door & Drawer Front height chart page in the catalog for correct sizes. All doors and drawer fronts must be ordered to the exact width and height needed.

Drawers:

Drawers can be ordered in either 5/8" or 3/4" melamine. All drawer box parts must be ordered to the exact width and height needed.